holm oak luxury

A ring made of stone gray oxidized oak. The oak wood turns dark gray as a result of oxidation, which perfectly brings out the diagonal wood rays that are characteristic of oak wood. Velvet gray and classy! These rather dark rings suit every skin type and almost every outfit. That makes them a classic in my collection. The simple holm oak ring can be perfectly complemented with an inlay or a zirconia. The seal can be optionally polished to a satin or glossy finish.

175,00 €

incl 19% MwSt | Versandkosten 4,50€ | Lieferzeit 3 Wochen
Categories: , Tags: , , , , ,

Bentwood ring made of holm oak wood using the bentwood ring technique!

material:
Oxidized oak wood, matte finish

wood specification:
Holm oak wood: oxidized oak wood dark gray with visible wood rays, medium hardness. The wood is just light enough to engrave a few letters. If you want a longer engraving, it is advisable to choose a slightly lighter wood, for example walnut, for the innermost layer so that the text is easy to read.

manufacturing:
All HolzTraum rings are made using the Bentwood technique. A thin strip of wood is bent with the fiber into a multi-layered ring. This technique makes it possible to produce very stable rings with a slim look. This is a big advantage over turned wooden rings. Unless brute force is used, Bentwood rings are unbreakable. Then the blank is ground to the desired width and shape. The ring is then sealed with a matt layer of acrylic resin.

ring size:
I make rings in sizes from 46 to 72mm and widths S (3.5-4.5mm), M (5-7mm) and L (7.5-12mm).
Please specify the ring size and width in the payment process.
If you are not sure which ring size you need, order a multisizer, which I will send to you in advance. You can then email me the ring size you have determined.

The offer is for a bentwood ring made of holm oak. Any engravings, inlays or stones that can be seen in the photos are not part of the offer and can be purchased separately.

You may also like…

FAQ ring selection

Yes, there is no personalization configurator on my website, because I wouldn’t even know what to set there. Much more is usually possible than a configurator would allow. If you have any questions as to whether your wishes can be implemented, call me (+49 160 933 339 35) or write me at m@holztraum-ringe.de

When you go to the checkout there is a free text field in which you can please enter the ring size, width, engraving text etc. If you missed the field, just send me an e-mail with the data.

Production usually takes two to four weeks.

If you are in a hurry, please ask BEFORE by phone.

the shipping costs are
wirhin Germany 4,50€
within EU monetary union 8,50€
to Switzerland 12,50€

For all other countries, please inquire beforehand.

I send the rings by post, the ring boxes as a consignment. Delivery to packing stations is not possible.

“Clandestine” deliveries with Hermes Shop-to-Shop are possible on request.

You can choose to pay with PayPal or in advance.

The rings offered in the shop are personalized made-to-measure products, which unfortunately cannot be exchanged according to the terms and conditions.

It is therefore all the more important that you determine the ring size in advance. Or read Giving a Ring Without a Size.

FAQ about the order process

In general, wooden rings fit just like metal rings. So the material does not play a role in determining the ring size.
Note, however, that the individual fingers of one hand have different strengths. If the ring is to be worn on a specific finger, you will need the ring size for that finger. Dehydrating drinks such as coffee, sage tea or red wine but also pregnancy can affect the measurement result.

If you don’t know your ring size and walking around town isn’t an option, you can order a ring sizer with the ring. I will then send it to you in advance free of charge.

A String, chewing gum paper, bag seals or grandma’s tape measure are definitely not suitable tools for determining the ring size at home. I can no longer change the ring size of finished rings. Expanding or compressing, as is possible with metal rings, is impossible with a wooden ring.

It is mainly a matter of personal taste how ready a ring should be.
It is generally said that a wide ring looks good on a slender finger, and a narrow ring looks better on a strong, short finger.

But it is also the case that a narrow ring tends to pinch the neighboring fingers. A washer would be the extreme. A very wide ring, on the other hand, can limit the freedom of movement of the finger.

A small ring, e.g. size 48, is 4mm narrow and 8mm wide. A medium-sized one, e.g. size 60, is narrow at 4.5mm and wide at 9mm. A really large ring, e.g. size 70, is narrow at 5mm and wide at 11mm. Medium is in between, rule of three is possible.

Luxury (most sold)
Each luxury ring in my collection is covered with a matt polished, closed layer of acrylic resin. This looks very elegant and makes it more durable and hard-wearing (a ring like this can withstand a 40° wash cycle in the washing machine).

glossy
Like luxury, only polished to a high gloss. With finely structured woods, the glossy surface emphasizes the wood structure. However, the surface can become matt or shiny over time through daily use, depending on the stress.

pure
The pur rings in my collection are stabilized with acrylic resin but not sealed. The rings are a bit more natural but also more sensitive.
Rings made of black oak are not available in “Pure” due to the structure of the wood.

I engrave in the ring using a laser engraver. The laser beam burns letters, characters or shapes into the wood. You can choose from different fonts. I can also use image templates that only consist of black and white in jpg and png format.

Light to brown wood and a ring width of 4.5 mm or more are advantageous for an engraving.

It is difficult in dark wood, because black on black is difficult to read. Here I recommend choosing the inside of the ring from a lighter wood.
It is also difficult to engrave 30 characters in a small ring. Smaller font is harder to read.

With a Bentwood ring, the wood is bent with the grain so that a ring with 3-4 thin layers of wood glued together is created from a 25-30cm long veneer strip. This process makes the ring much more statically resilient than a turned wooden ring would be, and allows a lower material thickness of 2.2 mm and upwards.

Nevertheless, a wooden ring has a limited lifespan. Comparable to floors, there are materials for eternity and some for feeling good. A metal ring lasts a lifetime, a wooden ring cannot. It will wear out like a wooden floor.
Sand and hard objects that leave dents in the wood will damage the ring. You should take off the wooden ring for gardening, climbing, playing in the sand or carrying beer crates. Showering, washing your hands or going to the sauna is no problem.

Water and heat SOMETIMES. AVOID bruising, bending or sanding.

Unfortunately, since made-to-measure rings are non-returnable, buying a ring based on an estimated size is risky. If you would like to surprise someone with a ring from HolzTraum, call me first on +49 160 933 339 35 or email me at m@holztraum-ringe.de

I have almost 100 rings in different sizes and types of wood in stock, from which you can choose one that you are happy to give away as a surprise and then return it to configure your personal dream ring.

small printed
Copyright © 2023 | HolzTraum